ZKG Vacuum Harrow(Rake) Dryer for New-Energy Lithium-Ion Battery Materials: Battery Anode Graphite Powder
ZKG Vacuum Harrow(Rake) Dryer is evaluated for battery anode graphite powder in new-energy lithium-ion battery materials. The defined feed is aqueous-washed graphite powder or cake. Review the material-specific operating requirements below alongside the original equipment specifications.
Battery Anode Graphite Powder: Application and Process Requirements
For battery anode graphite powder, limit fine-powder entrainment and mechanical contamination. Start with aqueous-washed graphite powder or cake, and identify the volatile phase and incoming variability before choosing a cycle.
Feed, Quality and Downstream Interface
| Review item | Battery Anode Graphite Powder |
|---|---|
| Defined feed | aqueous-washed graphite powder or cake |
| Material-specific focus | limit fine-powder entrainment and mechanical contamination |
| Product quality checks | moisture, ash, particle distribution and metal contamination |
| Downstream handling | protected transfer before anode-slurry preparation |
Loading and Material Movement
Include moisture, ash, particle distribution and metal contamination in the trial record. Define the sampling locations and analytical methods before the test; a result from a different grade, loading pattern or residual liquor cannot establish the operating endpoint for this feed.
Drying Endpoint and Acceptance
Compare representative mixed-batch, discharge and retained-heel samples.
Rake agitation is not a freeze-drying or calcination process.
Material-Specific Configuration
Vacuum Rake Dryer selection for this feed should be assessed alongside the agitated vacuum dryer process description. Evaluate industrial vacuum dryer and low-temperature vacuum drying with representative battery anode graphite powder. This chemical powder drying application requires a material-specific sampling and acceptance plan.
After the batch meets the agreed specification, arrange protected transfer before anode-slurry preparation. Examine the effect of discharge, temporary holding and packaging exposure on the measured product condition. Establish the usable batch and cycle for this material; the original model parameters below remain the equipment reference, not a throughput promise for every formulation.
View the ZKG Vacuum Harrow(Rake) Dryer range and original equipment specifications
Technical References for This Application
Keep the powder-drying duty separate from cell electrochemistry and performance qualification. U.S. DOE battery-material context.
Specify the intended cathode chemistry and precursor or finished-powder stage. U.S. DOE cathode-material chemistry reference.
Review the supplier SDS for the actual grade and residual process liquor. HSE safety-data-sheet guidance.
Assess charging, sampling, cleaning and discharge around the selected material. HSE process exposure assessment.
Define the heat-transfer duty and utilities rather than assuming a universal drying cycle. U.S. DOE process-heat reference.
Equipment Reference Parameters
These are the ZKG Vacuum Harrow(Rake) Dryer model specifications. The operating duty for battery anode graphite powder must be established from the feed and the finished-product requirements above.
| Item | Unit | ZKG-500 | ZKG-750 | ZKG-1000 | ZKG-1500 | ZKG-2000 | ZKG-3000 | ZKG-5000 | ZKG-8000 | ZKG-10000 |
|---|---|---|---|---|---|---|---|---|---|---|
| Working Volume | L | 300 | 450 | 600 | 900 | 1200 | 1800 | 3000 | 4800 | 6000 |
| Internal Diameter | mm | Φ600 | Φ800 | Φ800 | Φ1000 | Φ1000 | Φ1200 | Φ1400 | Φ1600 | Φ1800 |
| Length | mm | 1500 | 1500 | 2000 | 2000 | 2600 | 2600 | 3400 | 4000 | 4000 |
| Agitator Speed | rpm | 5–25 | 5–25 | 5–15 | 5–15 | 5–15 | 5–10 | 5–8 | 4–6 | 3–6 |
| Total Power | kW | 5.5 | 7.5 | 11 | 11 | 15 | 22 | 30 | 45 | 55 |
| Jacket Design Pressure | MPa | 0–0.8 | 0–0.8 | 0–0.8 | 0–0.8 | 0–0.8 | 0–0.8 | 0–0.8 | 0–0.8 | 0–0.8 |
| Internal Design Pressure | MPa | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 | −0.095 to +0.1 |
Discuss Battery Anode Graphite Powder Drying
Send QUANPIN the incoming battery anode graphite powder specification, sample information and the required final product condition for an equipment review.
Start Optimizing Your
Drying Process Today.
Our engineers are ready to assess your material and recommend a reliable, cost-effective drying solution.