Titanium Dioxide Pigment: Application and Process Requirements

For titanium dioxide pigment, control abrasion and hard agglomerate formation without claiming drying changes pigment grade. Start with washed pigment cake, and identify the volatile phase and incoming variability before choosing a cycle.

Feed, Quality and Downstream Interface

Loading and Material Movement

Observe charging behavior, agitation resistance and deposits through the wet-to-dry transition.

Include moisture, color, dispersibility and metal contamination in the trial record. Define the sampling locations and analytical methods before the test; a result from a different grade, loading pattern or residual liquor cannot establish the operating endpoint for this feed.

Drying Endpoint and Acceptance

Do not infer continuous capacity or solvent compatibility from the equipment name.

Material-Specific Configuration

agitated vacuum dryer selection for this feed should be assessed alongside the industrial vacuum dryer process description. Evaluate low-temperature vacuum drying and heat-sensitive material drying with representative titanium dioxide pigment. This chemical powder drying application requires a material-specific sampling and acceptance plan.

After the batch meets the agreed specification, arrange transfer to finishing or milling under the agreed pigment specification. Examine the effect of discharge, temporary holding and packaging exposure on the measured product condition. Establish the usable batch and cycle for this material; the original model parameters below remain the equipment reference, not a throughput promise for every formulation.

View the ZJG Vacuum Paddle Dryer range and original equipment specifications

Technical References for This Application

Review the supplier SDS for the actual grade and residual process liquor. HSE safety-data-sheet guidance.

Assess charging, sampling, cleaning and discharge around the selected material. HSE process exposure assessment.

Use the actual powder test data when defining dust collection and handling. HSE combustible-dust handling guidance.

Review operation, access, maintenance and the agreed equipment supply scope. HSE work-equipment selection guidance.

Define the heat-transfer duty and utilities rather than assuming a universal drying cycle. U.S. DOE process-heat reference.