CT-C Hot Air Circulation Oven for Chemical and Mineral Processing: Ceramic Green Parts
CT-C Hot Air Circulation Oven is evaluated for ceramic green parts in chemical and mineral processing. The defined feed is formed aqueous-wet ceramic pieces before firing. Match this duty to the material checks below and the unchanged original equipment parameters.
Ceramic Green Parts: Application and Process Requirements
For ceramic green parts, control shrinkage gradients and cracking while keeping drying separate from sintering. Begin with formed aqueous-wet ceramic pieces before firing and confirm how the incoming grade varies before defining the drying cycle.
Feed, Product Quality and Downstream Handling
| Review item | Ceramic Green Parts |
|---|---|
| Defined feed | formed aqueous-wet ceramic pieces before firing |
| Material-specific focus | control shrinkage gradients and cracking while keeping drying separate from sintering |
| Product checks | residual moisture, dimensional change, cracks and handling strength |
| Downstream handling | careful transfer to the separately specified ceramic firing process |
Material Movement and Drying Control
Include residual moisture, dimensional change, cracks and handling strength in the trial record. Fix the sampling locations and analytical methods before comparing trials; feed preparation and cooling can affect the measured result.
Drying Endpoint and Product Acceptance
After acceptance, arrange careful transfer to the separately specified ceramic firing process. Review discharge, temporary holding and packaging exposure as part of the moisture-control plan.
Application-Specific Equipment Selection
CT-C Hot Air Circulation Oven selection for ceramic green parts starts with Hot Air Circulation Oven requirements and the defined feed. Assess hot air ovens and hot-air circulation drying together with tray drying; the batch oven drying duty must be demonstrated using representative material and the required finished-product specification.
View the CT-C Hot Air Circulation Oven range and original equipment specifications
Technical References for This Application
Obtain the SDS for the actual grade and residual process liquor. HSE safety-data-sheet guidance.
Assess charging, sampling, cleaning and discharge for the selected material. HSE exposure-assessment guidance.
Review the dust characteristics of the collected dry material. HSE combustible-dust guidance.
Review operation and maintenance around the specified equipment configuration. HSE work-equipment guidance.
Review the thermal duty and utilities for the actual feed. U.S. DOE process-heat reference.
Equipment Reference Parameters
These are the CT-C Hot Air Circulation Oven model specifications. The operating duty for ceramic green parts must be established from the feed and the finished-product requirements above.
| Model | Equivalent Model | Drying Capacity (kg/batch) | Fan Power (kW) | Air Volume (m³/h) | Heat-Transfer Area (m²) | Steam Consumption (kg/h) | Electric Heating (kW) | Overall Dimensions (mm) | Trolleys | Trays | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CT-C-O | RXH5-C | 30 | 0.55 | 3450 | 5 | 8 | 6 | 1300×1200×1600 | 0 | 16 | 680 |
| CT-C-IA | RXH-7-C | 50 | 0.55 | 3450 | 10 | 10 | 9 | 1400×1200×2000 | 1 | 24 | 800 |
| CT-C-I | RXH-14-C | 100–120 | 0.55×2 | 6900 | 20 | 18 | 15 | 2300×1200×2000 | 2 | 48 | 1300 |
| CT-C-I(B) | RXH-14-C | 100–120 | 0.55×2 | 6900 | 20 | 18 | 15 | 1400×2200×2000 | 2 | 48 | 1300 |
| CT-C-II | RXH-27-C | 200–240 | 0.55×2 | 6900 | 40 | 36 | 30 | 2300×2200×2000 | 4 | 96 | 1800 |
| CT-C-III | RXH-41-C | 300–360 | 0.55×3 | 10350 | 80 | 72 | 45 | 3300×2200×2000 | 6 | 144 | 2300 |
| CT-C-III(B) | RXH-41-C | 300–360 | 0.55×3 | 10350 | 80 | 72 | 45 | 2300×3200×2000 | 6 | 144 | 2300 |
| CT-C-IV | RXH-54-C | 400–480 | 0.55×4 | 13800 | 100 | 90 | 60 | 4450×2200×2000 | 8 | 192 | 2800 |
| CT-C-IV(B) | RXH-54-C | 400–480 | 0.55×4 | 13800 | 100 | 90 | 60 | 2300×4200×2000 | 8 | 192 | 2800 |
| CT-C-VI | / | 600–720 | 0.55×6 | 20700 | 160 | 144 | 90 | 4450×3200×2000 | 12 | 288 | 3800 |
| Parameter | Project Information |
| Product | Material form, initial moisture and temperature limits |
| Batch | Loading quantity and production schedule |
| Trays | Tray quantity, dimensions and loading depth |
| Heating | Available heat source and temperature requirements |
| Airflow | Circulation, ventilation and exhaust requirements |
| Controls | Temperature settings, timing and monitoring needs |
| Installation | Available utilities, space and cleaning requirements |
| Test Item | Record or Assessment |
| Loading | Material, batch mass and tray distribution |
| Preparation | Batch loading and initial moisture |
| Heating | Air and product temperatures and duration |
| Drying completion | Final moisture and drying time |
| Final product | Residual moisture, appearance and product-specific checks |
| Utilities | Measured consumption under the stated test conditions |
Discuss Ceramic Green Parts Drying
Send QUANPIN the incoming ceramic green parts specification, sample information and the required final product condition for an equipment review.
Start Optimizing Your
Drying Process Today.
Our engineers are ready to assess your material and recommend a reliable, cost-effective drying solution.