DW Mesh-Belt Dryer for Animal Feed Manufacturing: Fish Feed Pellets
DW Mesh-Belt Dryer is evaluated for fish feed pellets in animal feed manufacturing. The defined feed is formed aquatic feed pellets with the specified formulation. Match this duty to the material checks below and the unchanged original equipment parameters.
Fish Feed Pellets: Application and Process Requirements
For fish feed pellets, control the drying gradient and pellet strength without implying extrusion or sterilization. Begin with formed aquatic feed pellets with the specified formulation and confirm how the incoming grade varies before defining the drying cycle.
Feed, Product Quality and Downstream Handling
| Review item | Fish Feed Pellets |
|---|---|
| Defined feed | formed aquatic feed pellets with the specified formulation |
| Material-specific focus | control the drying gradient and pellet strength without implying extrusion or sterilization |
| Product checks | moisture, water activity, pellet durability and water stability |
| Downstream handling | cooling before any separately specified oil coating and packing |
Material Movement and Drying Control
Include moisture, water activity, pellet durability and water stability in the trial record. Fix the sampling locations and analytical methods before comparing trials; feed preparation and cooling can affect the measured result.
Drying Endpoint and Product Acceptance
After acceptance, arrange cooling before any separately specified oil coating and packing. Review discharge, temporary holding and packaging exposure as part of the moisture-control plan.
Application-Specific Equipment Selection
DW Mesh-Belt Dryer selection for fish feed pellets starts with Belt Dryer requirements and the defined feed. Assess belt conveyor drying and through-flow drying together with Industrial drying equipment; the Drying Equipment duty must be demonstrated using representative material and the required finished-product specification.
Drying is separate from extrusion, conditioning, coating and feed-hygiene validation. Verify the intended animal species, formulation and storage conditions under the facility quality program.
View the DW Mesh-Belt Dryer range and original equipment specifications
Technical References for This Application
Define the animal-feed manufacturing and hygiene controls. FDA animal-food manufacturing guidance.
Review the feed process and its product-specific hazards. FDA animal-food preventive-controls overview.
Review the dust characteristics of the collected dry material. HSE combustible-dust guidance.
Review operation and maintenance around the specified equipment configuration. HSE work-equipment guidance.
Review the thermal duty and utilities for the actual feed. U.S. DOE process-heat reference.
Equipment Reference Parameters
These are the DW Mesh-Belt Dryer model specifications. The operating duty for fish feed pellets must be established from the feed and the finished-product requirements above.
| Model | DW Series |
| Belt width | 1.2, 1.6 or 2 m |
| Drying section length | 8 or 10 m |
| Material layer thickness | 10–80 mm |
| Operating temperature | 60–130°C |
| Steam pressure | 0.2–0.8 MPa |
| Belt construction | Stainless steel mesh |
| Control | Button control; PLC and touchscreen on request |
| Adjustable conditions | Belt speed, air conditions and temperature |
| Applications | Suitable vegetables, herbal materials, granules, chemicals and other permeable feeds |
| Model | Unit | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 |
|---|---|---|---|---|---|---|---|
| Number of Units | — | 4 | 6 | 4 | 6 | 4 | 6 |
| Belt Width | m | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 |
| Drying-Section Length | m | 8 | 10 | 8 | 10 | 8 | 10 |
| Material-Layer Thickness | mm | 10–80 | 10–80 | 10–80 | 10–80 | 10–80 | 10–80 |
| Operating Temperature | °C | 60–130 | 60–130 | 60–130 | 60–130 | 60–130 | 60–130 |
| Steam Pressure | MPa | 0.2–0.8 | 0.2–0.8 | 0.2–0.8 | 0.2–0.8 | 0.2–0.8 | 0.2–0.8 |
| Steam Consumption | kg steam/kg H₂O | 2.2–2.5 | 2.2–2.5 | 2.2–2.5 | 2.2–2.5 | 2.2–2.5 | 2.2–2.5 |
| Evaporation Intensity | kg H₂O/(m²·h) | 6–20 | 6–20 | 6–20 | 6–20 | 6–20 | 6–20 |
| Total Fan Power | kW | 3.3 | 4.4 | 6.6 | 8.8 | 12 | 16 |
| Total Installed Power | kW | 4.05 | 5.15 | 7.35 | 9.55 | 13.1 | 17.1 |
| Item | Dryer Type | 1.2 | 1.4 | 1.6 | 1.8 | 2.0 |
|---|---|---|---|---|---|---|
| Effective Belt Width B | Single-Layer Belt Dryer DW-B×L | 1.2 | 1.4 | 1.6 | 1.8 | 2.0 |
| Effective Belt Width B | Three-Layer Belt Dryer DW3-B×L | 1.2 | 1.4 | 1.6 | 1.8 | 2.0 |
| Effective Belt Width B | Five-Layer Belt Dryer DW5-B×L | 1.2 | 1.4 | 1.6 | 1.8 | 2.0 |
| Single-Layer Effective Drying Length | — | 8–30 | 8–30 | 8–30 | 8–30 | 8–30 |
| Evaporation Intensity (kg/m²·h) | — | 1–6 | 1–6 | 1–6 | 1–6 | 1–6 |
| Steam Consumption (kg/kg H₂O) | — | 1.5–3 | 1.5–3 | 1.5–3 | 1.5–3 | 1.5–3 |
| Mesh-Belt Speed (m/h) | — | 10–30 | 10–30 | 10–30 | 10–30 | 10–30 |
| Material-Layer Thickness (mm) | — | 10–60 | 10–60 | 10–60 | 10–60 | 10–60 |
| Drying Temperature (°C) | — | 60–120 | 60–120 | 60–120 | 60–120 | 60–120 |
| Steam Pressure (MPa) | — | 0.2–0.6 | 0.2–0.6 | 0.2–0.6 | 0.2–0.6 | 0.2–0.6 |
| Equipment Name | Unit | Three Units in Series | Three Units in Series | Five-Layer Vegetable Dryer (Frame Type) |
|---|---|---|---|---|
| Model | — | DWP-3-2-10 | DWF-3-2-10 | DW-5-3-12 |
| Effective Belt Width | m | 2 | 2 | 3 |
| Effective Belt Length | m/unit | 10 | 10 | 12 |
| Number of Series-Connected Units | — | 3 | 3 | — |
| Number of Layers | — | — | — | 5 |
| Vegetable Throughput | kg/h | 600 | 720 | 2000 |
| Evaporation Capacity | kg/h | 400–510 | 480–640 | 1440–1800 |
| Steam Consumption | kg/kg H₂O | 2.2–2.5 | 2.2–2.5 | 2.2–2.4 |
| Heat-Transfer Area | m² | 900 | 1440 | 2600 |
| Total Installed Power | kW | 70 | 52 | 150 |
| Overall Dimensions | m | 33.2×2.58×2.8 | 33.2×2.27×2.85 | 15.3×4.3×8.5 |
| Heat Source | — | Steam / thermal oil / hot-air furnace / electricity | Steam / thermal oil / hot-air furnace / electricity | Steam / thermal oil / hot-air furnace / electricity |
| Model | Unit | DW-3×12 |
|---|---|---|
| Effective Belt Width | m | 3 |
| Effective Belt Length | m/unit | 12 |
| Operating Temperature | °C | 80–130 |
| Steam Pressure | MPa | 0.4–0.8 |
| Drying Time | min | 35–50 |
| Material-Layer Thickness | cm | 5–8 |
| Evaporation Capacity | kg/h | 6–20 |
| Steam Consumption | kg/kg H₂O | 2–2.4 |
| Total Installed Power | kW | 76 |
| Overall Dimensions | m | 15.1×4.3×3.4 |
Equipment Views
Discuss Fish Feed Pellets Drying
Send QUANPIN the incoming fish feed pellets specification, sample information and the required final product condition for an equipment review.
Start Optimizing Your
Drying Process Today.
Share your material and production requirements with our engineering team.