KJG Hollow Paddle Dryer for Polymer Manufacturing: Polyamide 6 Granules
KJG Hollow Paddle Dryer is evaluated for polyamide 6 granules in polymer manufacturing. The defined feed is washed aqueous-wet polyamide 6 granules. Match this duty to the material checks below and the unchanged original equipment parameters.
Polyamide 6 Granules: Application and Process Requirements
For polyamide 6 granules, separate bulk water removal from the final resin-conditioning requirement. Begin with washed aqueous-wet polyamide 6 granules and confirm how the incoming grade varies before defining the drying cycle.
Feed, Product Quality and Downstream Handling
| Review item | Polyamide 6 Granules |
|---|---|
| Defined feed | washed aqueous-wet polyamide 6 granules |
| Material-specific focus | separate bulk water removal from the final resin-conditioning requirement |
| Product checks | moisture, pellet integrity, residual extractables and color |
| Downstream handling | protected handling before the separately specified resin conditioning step |
Material Movement and Drying Control
Include moisture, pellet integrity, residual extractables and color in the trial record. Fix the sampling locations and analytical methods before comparing trials; feed preparation and cooling can affect the measured result.
Drying Endpoint and Product Acceptance
After acceptance, arrange protected handling before the separately specified resin conditioning step. Review discharge, temporary holding and packaging exposure as part of the moisture-control plan.
Application-Specific Equipment Selection
KJG Hollow Paddle Dryer selection for polyamide 6 granules starts with Hollow Paddle Dryer requirements and the defined feed. Assess Contact Dryer and conductive drying together with indirect contact dryers; the chemical powder drying duty must be demonstrated using representative material and the required finished-product specification.
View the KJG Hollow Paddle Dryer range and original equipment specifications
Technical References for This Application
Obtain the SDS for the actual grade and residual process liquor. HSE safety-data-sheet guidance.
Assess charging, sampling, cleaning and discharge for the selected material. HSE exposure-assessment guidance.
Review the dust characteristics of the collected dry material. HSE combustible-dust guidance.
Review operation and maintenance around the specified equipment configuration. HSE work-equipment guidance.
Review the thermal duty and utilities for the actual feed. U.S. DOE process-heat reference.
Equipment Reference Parameters
These are the KJG Hollow Paddle Dryer model specifications. The operating duty for polyamide 6 granules must be established from the feed and the finished-product requirements above.
| Specitem | KJG-3 | KJG-9 | KJG-13 | KJG-18 | KJG-29 | KJG-41 | KJG-52 | KJG-68 | KJG-81 | KJG-95 | KJG-110 | KJG-125 | KJG-140 |
| Heat transferring area(m²) | 3 | 9 | 13 | 18 | 29 | 41 | 52 | 68 | 81 | 95 | 110 | 125 | 140 |
| Effective volume(m³) | 0.06 | 0.32 | 0.59 | 1.09 | 1.85 | 2.8 | 3.96 | 5.21 | 6.43 | 8.07 | 9.46 | 10.75 | 12.18 |
| Range of rotating speed(rmp) | 15–30 | 10–25 | 10–25 | 10–20 | 10–20 | 10–20 | 10–20 | 10–20 | 5–15 | 5–15 | 5–10 | 1–8 | 1–8 |
| Power(kw) | 2.2 | 4 | 5.5 | 7.5 | 11 | 15 | 30 | 45 | 55 | 75 | 95 | 90 | 110 |
| Width of vessel(mm) | 306 | 584 | 762 | 940 | 1118 | 1296 | 1474 | 1652 | 1828 | 2032 | 2210 | 2480 | 2610 |
| total width(mm) | 736 | 841 | 1066 | 1320 | 1474 | 1676 | 1854 | 2134 | 1186 | 2438 | 2668 | 2732 | 2935 |
| Length of vessel(mm) | 1956 | 2820 | 3048 | 3328 | 4114 | 4724 | 5258 | 5842 | 6020 | 6124 | 6122 | 7500 | 7860 |
| Total length(mm) | 2972 | 4876 | 5486 | 5918 | 6808 | 7570 | 8306 | 9296 | 9678 | 9704 | 9880 | 11800 | 129000 |
| Distance of material inlet&outlet(mm) |
1752 | 2540 | 2768 | 3048 | 3810 | 4420 | 4954 | 5384 | 5562 | 5664 | 5664 | 5880 | 5880 |
| Height of center(mm) | 380 | 380 | 534 | 610 | 762 | 915 | 1066 | 1220 | 1220 | 1430 | 1560 | 1650 | 1856 |
| Total height(mm) | 762 | 838 | 1092 | 1270 | 1524 | 1778 | 2032 | 2362 | 2464 | 2566 | 2668 | 2769 | 2838 |
| Steam inlet“N”(inch) | 3/4 | 3/4 | 1 | 1 | 1 | 1 | 11/2 | 11/2 | 11/2 | 11/2 | 2 | ||
| water outlet”O”(inch) | 3/4 | 3/4 | 1 | 1 | 1 | 1 | 11/2 | 11/2 | 11/2 | 11/2 | 2 |
Equipment Views
Discuss Polyamide 6 Granules Drying
Send QUANPIN the incoming polyamide 6 granules specification, sample information and the required final product condition for an equipment review.
Start Optimizing Your
Drying Process Today.
Our engineers are ready to assess your material and recommend a reliable, cost-effective drying solution.