YPG Pressure Spray Dryer for Food Ingredient Processing: Non-Dairy Creamer Powder
YPG Pressure Spray Dryer is evaluated for non-dairy creamer powder in food ingredient processing. The defined feed is homogenized emulsion of vegetable fat and permitted carrier ingredients. Match this duty to the material checks below and the unchanged original equipment parameters.
Non-Dairy Creamer Powder: Application and Process Requirements
For non-dairy creamer powder, maintain emulsion stability and limit surface fat during atomization. Begin with homogenized emulsion of vegetable fat and permitted carrier ingredients and confirm how the incoming grade varies before defining the drying cycle.
Feed, Product Quality and Downstream Handling
| Review item | Non-Dairy Creamer Powder |
|---|---|
| Defined feed | homogenized emulsion of vegetable fat and permitted carrier ingredients |
| Material-specific focus | maintain emulsion stability and limit surface fat during atomization |
| Product checks | moisture, free fat, dispersibility and oxidative stability |
| Downstream handling | protected cooling before coffee-creamer blending and packing |
Material Movement and Drying Control
Include moisture, free fat, dispersibility and oxidative stability in the trial record. Fix the sampling locations and analytical methods before comparing trials; feed preparation and cooling can affect the measured result.
Drying Endpoint and Product Acceptance
After acceptance, arrange protected cooling before coffee-creamer blending and packing. Review discharge, temporary holding and packaging exposure as part of the moisture-control plan.
Application-Specific Equipment Selection
YPG Pressure Spray Dryer selection for non-dairy creamer powder starts with Pressure Spray Dryer requirements and the defined feed. Assess Industrial spray dryer machine and Spray Drying together with Spray drying equipment; the industrial food dryer duty must be demonstrated using representative material and the required finished-product specification.
View the YPG Pressure Spray Dryer range and original equipment specifications
Technical References for This Application
Define hygiene and contamination controls for the food process. FDA food manufacturing practices.
Review food-hygiene planning alongside the drying operation. Codex food-hygiene resources.
Evaluate the finished ingredient using the agreed water-activity method. FDA water-activity reference.
Review the dust characteristics of the collected dry material. HSE combustible-dust guidance.
Review the thermal duty and utilities for the actual feed. U.S. DOE process-heat reference.
Equipment Reference Parameters
These are the YPG Pressure Spray Dryer model specifications. The operating duty for non-dairy creamer powder must be established from the feed and the finished-product requirements above.
| Model | 50 | 100 | 150 | 200 | 300 | 500 | 1000-10000 |
|---|---|---|---|---|---|---|---|
| Water Evaporation Capacity (kg/h) | 50 | 100 | 150 | 200 | 300 | 500 | 1000-10000 |
| Overall Dimensions (Φ × H) (mm) | 1600×8900 | 2000×1711500 | 2400×13500 | 2800×14800 | 3200×15400 | 3800×18800 | / |
| High-Pressure Pump Pressure (MPa) | 2-10 | ||||||
| Power kW | 8.5 | 14 | 22 | 24 | 30 | 82 | 30-300 |
| Inlet Air Temperature (°C) | 200-300 | ||||||
| Final Product Moisture Content (%) | < 5(0.5) | ||||||
| Product Recovery (%) | > 97 | ||||||
| Electric Heating (kW) | 79 | 120 | 150 | For temperatures below 200°C, specific values are calculated based on actual conditions. | |||
| Steam + Electric Heating (MPa + kW) | 0.5 +54 | 0.6+90 | 0.6+108 | ||||
| Hot-Air Furnace Capacity (×10⁴ kcal/h) | 10 | 15 | 20 | 30 | 40 | 50 | 120-1200 |
| Selection Item | Information Required |
| Feed | Material composition, solids content and viscosity |
| Capacity | Planned liquid feed and finished product output |
| Product | Target moisture, particle size and bulk properties |
| Heating | Available heat source and utility conditions |
| Construction | Contact material and cleaning requirements |
| Installation | Space, height and upstream/downstream connections |
Equipment Views
Discuss Non-Dairy Creamer Powder Drying
Send QUANPIN the incoming non-dairy creamer powder specification, sample information and the required final product condition for an equipment review.
Start Optimizing Your
Drying Process Today.
Our engineers are ready to assess your material and recommend a reliable, cost-effective drying solution.