Green Tea Extract Solids: Application and Process Requirements

For green tea extract solids, protect the agreed extract composition and control sticky deposits. Start with concentrated extract or isolated wet solids, and identify the volatile phase and incoming variability before choosing a cycle.

Feed, Quality and Downstream Interface

Loading and Material Movement

Set layer depth, loading distribution and tray position; inspect the slowest drying locations.

Include moisture, marker assay, color, residual solvent and redispersion in the trial record. Define the sampling locations and analytical methods before the test; a result from a different grade, loading pattern or residual liquor cannot establish the operating endpoint for this feed.

Material-Specific Configuration

Vacuum Tray Dryer selection for this feed should be assessed alongside the industrial vacuum dryer process description. Evaluate low-temperature vacuum drying and heat-sensitive material drying with representative green tea extract solids. This food vacuum drying application requires a material-specific sampling and acceptance plan.

After the batch meets the agreed specification, arrange protected transfer before beverage or supplement-ingredient blending. Examine the effect of discharge, temporary holding and packaging exposure on the measured product condition. Establish the usable batch and cycle for this material; the original model parameters below remain the equipment reference, not a throughput promise for every formulation.

View the FZG Vacuum Tray Dryer range and original equipment specifications

Technical References for This Application

Integrate the drying step with the site’s hygiene and hazard-control plan. Codex food-hygiene framework.

Specify hygienic product handling, cleaning and packaging for the intended market. FDA food-manufacturing practices.

Distinguish residual moisture from water activity in the finished food. FDA water-activity reference.

Use the actual powder test data when defining dust collection and handling. HSE combustible-dust handling guidance.

Define the heat-transfer duty and utilities rather than assuming a universal drying cycle. U.S. DOE process-heat reference.